Home | Contact | Sitemap | Admin
  • > 전기•전자 관련기기
  • > 전력품질분석기
  • > 휴대형 전력분석기
  • > ELCONTROL ENERGY NET
  • > 휴대형 전력품질분석기
Handheld Power Analyzer
NANOVIP PLUS(제조사 단종, NANOVIP TWO 대체)
모델명 NANOVIP PLUS(제조사 단종, NANOVIP TWO 대체)
제조사 ELCONTROL ENERGY NET
원산지 이탈리아
분류명 전력분석기

TECHNICAL SPECIFICATION


General specifications:
Inputs:

Voltage: (L1,N) max 600 VAC (20 Hz - 600 Hz)

Current: 1 Volt (20 Hz - 600 Hz.)

Voltage inputs overload: maximum permitted voltage 825VAC,1.17 KV peak.

Current input overload: 5 times Full scale value (a protective device trips when this limit is reached).

Number of scales: 3 voltage ranges, 3 current ranges.

Automatic scale change: Response time for scale change: 1 sec. The change to the next (higher) scale occurs at 105% of full scale value of the scale activated. The change to the next lower scale occurs at 20% of full scale value of the scale activated.

Dimensions: 80 x175 x 32,5 (without cover).

Weight of the instrument: 400 gr. including cover and batteries.

Weight of the whole kit: 1,6 Kg.

Protection level: IP40 (IEC 529)

Operating temperature range: -10°C to 50°C

Relative humidity range: 20% to 80% R.H.

Storage temperature range: -20°C to 60°C

Insulation: compliant to VDE 0110 group C for operating voltages 500 VAC

Insulation resistance: 500 MOhm between short-circuited input terminals and the case

Insulation voltage between voltage inputs: Test voltage= 2000V for 60 seconds

Insulation voltage between voltage inputs and case: Test voltage= 3000V for 60 seconds

Reference standards: IEC 348, VDE 0411 class 2, for low voltage circuits

- 600 VAC. IEC 1010 600V CAT III level of pollution 2.

EMC reference standards: EN 50081-1, EN50082-2, EN 55022

 

Power Supply:

Battery type: 1,5V AA alkaline-manganese IEC

LR6, nominal capacity 2700mAh

Battery life: 50-60 hours typical; 40-50 hours when

PEAK function is activated.

 

Measurement of primary parameters:

Measurement method: fixed sampling and A/D conversion

Sampling frequency: 1.25 KHz.

Number of samples: 250 (200 mS)

Measurement rate: 1second in normal operation, 0.4 second in PEAKmode

Zero self-regulation: every minute

 

PRIMARY MEASUREMENT ACCURACY

Measurement error in environment of 18°C to 25°C (after 10’ warming up):

expressed as ± % Rdg. (reading) + % F.S. (Full Scale) – see tables.

 

Additional measurement error outside this temperature range:

± 0,02% F.S. for each °C outside range.

 

Sensitivity and accuracy of voltage measurements:

Direct input with max voltage = 750 Vrms at Full Scale.

Input voltage peak factor .1,6.

Input impedance .4 M.


파일명 확장자 다운로드
 NANOVIP PLUS[Brochure].pdf (295KB)


상호 : 주식회사 마스  |  (우)13209 경기도 성남시 중원구 사기막골로 45번길 14 우림2차 A-1610호   |   Tel : 031-735-6310 / 6320   |   Fax : 031-735-6334
대표이사 / 개인정보관리책임자 : 안승만   |   사업자등록번호 : 129-86-80575   |   통신판매업등록번호 : 제2013-경기성남-0854호   |   메일 : mmm@m-m.co.kr

COPYRIGHT© MAS CO.,LTD. ALL RIGHTS RESERVED.