Home | Contact | Sitemap | Admin
  • > 데이터로거
  • > 다기능•다채널 데이터로거
  • > GRAPHTEC CORPORATION
  • > midi LOGGER
10-ch Data Logger
GL240
모델명 GL240
제조사 GRAPHTEC Corporation
원산지 일본
분류명 midi LOGGER

GL240 Specifications


ItemDescription

Number of analog input channels

10 channels

External input/
output *1

Input *2

Trigger or Sampling (1 channel), Logic/Pulse (4 channels)

Output *3

Alarm (4 channels)

Sampling interval

10 ms to 1 hour (10ms to 50ms: voltage only) *4, External signal

Time scale of waveform display

1sec. to 24 hour /division

Trigger,
Alarm function

Trigger action

Start or stop capturing data by the trigger

Repeat action

Off, On (auto rearmed)

Trigger source

Start: Off, Measured signal, Alarm, External, Clock, Week or Time
Stop: Off, Measured signal, Alarm, External, Clock, Week or Time

Condition Setting

Combination: OR or AND
Analog signal: Rising (High), Falling (Low), Window-in, Window-out
Logic signal: Pattern (combination of each input signal in high or low)
Pulse (number of count): Rising (High), Falling (Low), Window-in, Window-out

Alarm output

Outputs a signal when alarm condition occurs in the input signal *5

Pulse input
function

Rotation count
(RPM)

Counts the number of pulses per sampling interval and converts to rpm
(rotations per minute), Number of pulses for one rotation may be set to
50, 500, 5000, 50k, 500k, 5M, 50M, 500M rpm/F.S. (rpm./Full Scale)

Accumulating
count

Accumulates the number of pulses from the start of measurement
50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)

Instant count

Counts the number of pulses per sampling interval
50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)

Calculation
function

Between channels

Addition, Subtraction, Multiplication, and Division for analog input

Statistical

Select two calculations from Average, Peak, Maximum, Minimum, RMS

Search function

Search for analog signal levels, values of logic or pulse or alarm point
in captured data

Interface to PC

USB (Hi-speed), WLAN (using B-568 option)

Storage
device

Media

SD memory card (Support SDHC, up to 32 GB), supports 2 slots *6

Saved contents

Captured data, Setting conditions, Screen copy

Capturing mode

Mode: Normal, Ring, Relay
Ring: Saves most recent data (Number of captured data: 1000 to 2000000 points) *7
Relay: Saves data to multiple files without losing data until data capturing is stopped

Replay Data

Replays captured data that was saved in the GL240 (in BGD or CSV format)

Scaling (Engineering unit) function

Measured value can be converted to the specified engineering unit
• Analog voltage: Converts using four reference points (gain, offset)
• Temperature: Converts using two reference points (offset)
• Pulse count: Converts using two reference points (gain)

Action during data capture

• Displaying parst data (using dual display mode (Current + Past data))
• Hot-swapping the SD memory card
• Saving data in between cursors

Display

Size

4.3-inch TFT color LCD (WQVGA: 480 x 272 dots)

Language

English, French, German, Chinese, Korean, Russian, Spanish, Japanese

Information *8

Waveform in Y-T with digital values, Waveform only, Digital value, Digital values
and statistics values

Operating environment

0 to 45 ºC, 5 to 85 % RH (non condensed)
(When operating with battery pack 0 to 40 ºC, charging battery 15 to 35 ºC)

Power source

AC adapter

100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory)

DC power

8.5 to 24 V DC (DC drive cable (option B-514) is required)

Battery pack

Mountable battery pack (battery pack (option B-517): 7.2V DC, 2900mAh)

Power consumption *9

Max. 36 VA

External dimensions (W x D x H)

Approx.188 x 117 x 42 mm (Excluding projections)

Weight *10

500 g


Options and Accessories


ItemModel numberDescription

Wireless LAN unit

B-568

WLAN adapter, IEEE802.11b/g/n

Battery pack

B-569

Rechargeable Lithium-ion battery (7.2 V, 2900mAh)

Input/Output cable for GL series

B-513

2 m long (no clip on end of cable)

DC drive cable

B-514

2 m long (no clip on end of cable)

Humidity sensor

B-530

With 3 m long signal cable (with power plug)

Shunt resistor

B-551-10

250 ohms (it converts the signal to the "1-5V" from the "4-20mA")

AC power adapter

ACADP-20

Input: 100 to 240 V AC, Output: 24 V DC


파일명 확장자 다운로드
 GL240[Brochure].pdf (5MB)
 Selection Guide[Brochure].pdf (2MB)


상호 : 주식회사 마스  |  (우)13209 경기도 성남시 중원구 사기막골로 45번길 14 우림2차 A-1610호   |   Tel : 031-735-6310 / 6320   |   Fax : 031-735-6334
대표이사 / 개인정보관리책임자 : 안승만   |   사업자등록번호 : 129-86-80575   |   통신판매업등록번호 : 제2013-경기성남-0854호   |   메일 : mmm@m-m.co.kr

COPYRIGHT© MAS CO.,LTD. ALL RIGHTS RESERVED.