* Specifications
The Hydro-Mix HT is a microwave sensor designed to measure at high temperature in manufacturing industries
that use drying, ducting, conveying and mixing systems during processing.
Construction :
Body : 316 Stainless Steel (Food Safe).
Faceplate : Ceramic (Food Safe).
Internal Seals : FDA approved O-Rings.
Fixing : The Hydro Mix HT is flush mounted with the internal wall using the included mounting assembly.
Analogue Outputs :
Two configurable 0 to 20mA or 4 to 20mA current loop source available for moisture and temperature.
May also be converted to 0 to 10V DC.
Digital Inputs/Output :
Two configurable digital signals are provided for batch average start/stop or for moisture / temperature multiplexing purposes.
Digital (Serial) Communications :
Opto-Isolated RS485 2-Wire port.
Uses Hydro-Com communications protocol for read/write access to sensor parameters and values.
RS232 converter, Ethernet and USB interfaces are also available.
Measurement Range :
Moisture : 0 to 100%, material dependant.
Depth : Approx. 75 to 100mm, material dependant.
Operating Temperature :
Process :
Continuous : 0 to 120°C
Intermittent : 120 to 130°C ≤10 minutes
Ambient : 0 to 60°C
Environmental :
Pressure : None(Normal Standard)
Art.-No. 4100 Optional Pressure : HMHT-EX01 Fixing Plate Apply : Full vacuum(-1) to 5 Bar gauge.
* Note :
In a vacuum there are no additional considerations.
But if you use it at high pressure you should install some bracing to prevent the unit from being blown out.
Refresh Rate : Outputs are updated 25 times per second.
Connections :
The sensor is fitted with a 10-way MIL-SPEC connector.
A 4, 10 or 25 metre, 6 twisted pair cable pre-assembled for connection to a waterproof junction box is available.
Power Supply : +15Vdc to +30Vdc. 4W.