Display: | LCD
display with 6 numeric 0.506 inch (12.85mm) high digits and 5 alphanumeric
0.282inch (7.11mm) high digits |
Indicators: | Battery
level, On Target, Select, TACH, and EXT icons |
Memory: | Last
setting before power down is remembered and restored on next power up. 5 user
settable memory locations |
Flash Duration: | Adjustable
0.1 to 2500 microseconds or .1 to 18 degrees of rotation (auto adjusts with
flash rate) |
Safety: | This
product is designed to be safe for indoor use under the following conditions
(per IEC61010-1) |
Compliance: | CE
EN61326-1:2006 EMC 2004/108/EC |
Operating Temp.: | 32-104°F
(0-40°C) |
Humidity: | Maximum
relative humidity 80% for temperature up to 88°F (31°C) decreasing linearly
to 50% RH at 104°F (40°C) |
Input Power: | Battery
powered: Internal Li-Ion rechargeable batteries 3.6Vdc |
Light Source: | 7
LED Array |
Light Ouput: | Average:
2000 Lux at 6000 FPM 12” from lens, 2° duty cycle |
Max light output: 8300 Lux |
Color Temp.: | Approx.
6200°K |
Run Time: | 5
hours typical at 6000 FPM, and 2.8° pulse width with fully charged
batteries |
Charge Time: | 4-5
hours typical with supplied charger |
Weight: | 0.6
lbs (0.27kg) including batteries |
Dimensions: | 7.75"
x 2.75" x 2.3" (197 x 70 x 58 mm) |
| |
Internal Mode: | |
Flash Range: | 30-300,000
FPM (Flashes per minute) 0.5 to 5000Hz |
Flash Rate Accuracy: | 0.005%
of setting or ± last digit |
Flash Rate Resolution: | 0.01
to 1 FPM (menu selectable) |
0.1 FPM resolution above 9,999.99 FPM |
1 FPM resolution above 99,999.9 |
External Modes: | |
Flash Range: | 0-300,000
FPM (Flashes per minute) 0.5 to 5000Hz |
Tachometer Mode: | 30
to 300,000 RPM |
Accuracy: | ±0.005%
of reading or ± last digit |
Display Update Rate: | 0.5
second typical above 120 RPM |
Trigger to Flash Delay: | ~15
µsec |
External Input: | 2.5V
to 12V peak pulse 500 nanosec min pulse width, positive or negative edge
triggered (menu selectable) |
Display Update Rate: | Instantaneous |
Output Pulse: | 3V
pulse. One pulse per flash in internal mode. Mimics input pulse in external
mode |
Time Base: | Ultra
Stable Crystal Oscillator
|