Home | Contact | Sitemap | Admin
  • > 물리•물성 관련기기
  • > 열전대용접기
  • > DCC CORPORATION
Thermocouple Welder
Art.-No. HotSpot-I/II/PLUS Series
모델명 Art.-No. HotSpot-I/II/PLUS Series
제조사 DCC Corporation
원산지 미국
분류명 열전대용접기

Art.-No. 10-A10240R : HotSpot-I Specifications

Product Type

General Thermocouple Welder

Voltage Rating

Art.-No. 10-A10240R : 240VAC / 50&60Hz [International Voltage]

(or)

Art.-No. 10-A10120R : 120VAC / 60Hz [USA Voltage]

Height

83mm (3.25 inches)

Depth

159mm (6.25 inches)

Width

153mm (6 inches)

Weight

2.84 Kg (6.25 lbs)

Stored Weld Energy

5 to 50 Watt/sec

Weld Capability

AWG No. #24 = Wire diam : 0.511 mm = Area : 0.205mm²

Welds wire pairs of AWG No. #24 gauge or finer

 

AWG No. #20 = Wire diam : 0.812 mm = Area : 0.519mm²

(AWG No. #20 for J, K &E)

Cycle Time

Can perform 5 to 10 welds per minute, depending on energy setting.

Controls

Provides energy adjustment control, and visual and audio indication of weld charge cycle completion.

Power

Will operate from either AC lines or self-charging internal battery. Will perform several hundred welds on charged battery.

120VAC / 60Hz line power (220 VAC 50/60 Hz Optional)

Wire Gauge

AWG No. #24 = Wire diam : 0.511 mm = Area : 0.205mm²

Welds wire pairs of AWG No. #24 gauge or finer

 

AWG No. #20 = Wire diam : 0.812 mm = Area : 0.519mm²

(AWG No. #20 for J, K &E)



Art.-No. 20-A10240R : HotSpot-II Specifications

Product Type

Heavy Duty Thermocouple Welder

Voltage Rating

Art.-No. 20-A10240R : 240VAC / 50&60Hz [International Voltage]

(or)

Art.-No. 20-A10120R : 120VAC / 60Hz [USA Voltage]

Height

89mm (3.5 inches)

Depth

216nmm (8.5 inches)

Width

292mm (11.5 inches)

Weight

6.35 Kg (14 lbs)

Stored Weld Energy

5 to 250 Watt/sec

Weld Capability

AWG No. #14 = Wire diam : 1.63 mm = Area : 2.08mm²

AWG No. #8 = Wire diam : 3.26 mm = Area : 8.35mm²

Welds wire pairs of AWG No. #14 gauge or finer, and AWG No. #8 or lighter studs

Cycle Time

Charging time at maximum energy setting is less than 10 seconds

Controls

Provides energy adjustment control, dual 2 position energy range switch, and LED displays to indicate charging and energy storage status.

Power

220 VAC / 50&60Hz Line Power [International Voltage]

120 VAC / 60Hz Line Power [USA Voltage]

Circuit Protected by 3 Amp Breaker

Wire Gauge

AWG No. #14 = Wire diam : 1.63 mm = Area : 2.08mm²

AWG No. #8 = Wire diam : 3.26 mm = Area : 8.35mm²

Welds wire pairs of AWG No. #14 gauge or finer, and AWG No. #8 or lighter studs




Art.-No. 40-A10240R : HotSpot-PLUS Specifications

Product Type

Heavy Duty Capacitive Discharge Thermocouple Welder

Voltage Rating

Art.-No. 40-A10240R : 240VAC / 50&60Hz [International Voltage]

(or)

Art.-No. 40-A10120R : 120VAC / 60Hz [USA Voltage]

Height

89mm (3.5 inches)

Depth

216nmm (8.5 inches)

Width

292mm (11.5 inches)

Weight

8.16 Kg (18 lbs)

Stored Weld Energy

5 to 525 Watt/sec

Weld Capability

AWG No. #12 = Wire diam : 2.05 mm = Area : 3.31mm²

Welds up to #10 studs, #10 pins, and AWG No. #12 gauge wire pairs

Cycle Time

Charging time at maximum energy setting is less than 10 seconds

Controls

Provides energy adjustment control, 2 position energy range switch,

on/off ac power switch, and LED displays to indicate charging and energy storage status.

Power

220 VAC / 50&60Hz Line Power [International Voltage]

120 VAC / 60Hz Line Power [USA Voltage]

Circuit Protected by 1.5 Amp Breaker

Wire Gauge

AWG No. #12 = Wire diam : 2.05 mm = Area : 3.31mm²

Welds up to #10 studs, #10 pins, and AWG No. #12 gauge wire pairs


◆ Accessory.


Art.-No.  Art.-No. 10-A10240R [220VAC] Art.-No. 20-A10240R [220VAC] Art.-No. 40-A10240R [220VAC]
Model HotSpot-I Series HotSpot-II Series HotSpot-PLUS Series
◆ Consist of HotSpot-I Welder and Metal Case HotSpot-II Welder and Metal Case HotSpot-Plus Welder and Metal Case
Standard 6" Wire Holding Pliers Standard 6" Wire Holding Pliers Standard 6" Wire Holding Pliers
Eye Shielding Protective Goggles Eye Shielding Protective Goggles Eye Shielding Protective Goggles
Carbon Block Carbon Block Carbon Block
Grounding Magnet Grounding Magnet Grounding Magnet
Korean/English Instruction Manual Korean/English Instruction Manual Korean/English Instruction Manual
    Handheld Control and Attachment Cable
◆ Optional (별매품) Art.-No. 20-A2000 : Welder Expansion Kit Art.-No. 20-A2000 : Welder Expansion Kit Art.-No. 20-A2000 : Welder Expansion Kit
Holding Vice Holding Vice Holding Vice
Diagonal Cutter Diagonal Cutter Diagonal Cutter
Miniature 5" Wire Holding Pliers Miniature 5" Wire Holding Pliers Miniature 5" Wire Holding Pliers
High Temperature Utility Cement High Temperature Utility Cement High Temperature Utility Cement
Dressing File Dressing File Dressing File
Extra Quick Release Attachment Ferrules Extra Quick Release Attachment Ferrules Extra Quick Release Attachment Ferrules
Magnifier Loupe Magnifier Loupe Magnifier Loupe
◆ Spare (별매품) Wraparound Field Cover

Wraparound Field Cover

Wraparound Field Cover
    Argon Purge Attachment
    Spot Welding Probe
    Spot Welding Tips Pk of 6 
  Insul Pin #10 Attachment Probe Insul Pin #10 Attachment Probe
  Insul Pin #12 Attachment Probe Insul Pin #12 Attachment Probe
    Stud Welding Probe
    Foot Switch and 12' Connecting Cable
Pliers, Mini Pliers, Mini Pliers, Mini


파일명 확장자 다운로드
 Art.-No. HotSpot-I Series[Brochure].pdf (574KB)
 Art.-No. HotSpot-II Series[Brochure].pdf (530KB)
 Art.-No. HotSpot-PLUS Series[Brochure].pdf (455KB)


상호 : 주식회사 마스  |  (우)13209 경기도 성남시 중원구 사기막골로 45번길 14 우림2차 A-1610호   |   Tel : 031-735-6310 / 6320   |   Fax : 031-735-6334
대표이사 / 개인정보관리책임자 : 안승만   |   사업자등록번호 : 129-86-80575   |   통신판매업등록번호 : 제2013-경기성남-0854호   |   메일 : mmm@m-m.co.kr

COPYRIGHT© MAS CO.,LTD. ALL RIGHTS RESERVED.